Shin-Etsu General Purpose Grease
Product Information
Honda Part # 08798-9013 is Shin-Etsu part number G-3W-0-M.
This Shin-Etsu G-3W-0 series of silicone greases is now known as the G30 series. The equivalent grease to Honda part number 08798-9013 is now the G-30M.
It is recommended in Honda manuals that you apply silicone grease to the rubber seals of your car every 3-6 months to protect against squeaks and leaks.
We supply this item in two forms - a 30g syringe and a 100g tube these are priced at £10.49 and £20.99 plus VAT and carriage.Please note the 100g tube is now available again
When applying silicone grease it is recommended that all old grime and grease is removed from the seal before the application of fresh grease. Then put some Shin-Etsu G-30M onto a clean cloth and rub it into the rubber seals around the doors, window and sunroof, the boot and under the bonnet may also require attention.The application process should be repeated twice, to ensure that the grease has been worked into the rubber surface as much as possible.
| Item | G-30M | |
| Appearance | Greyish white grease | |
| Specific Gravity 25°C | 1.00 | |
| JIS K42220 | Penetration 25°C/JIS worked | 240-280 |
| Drop Point 25°C | Over 200 | |
Oil separation (%) 150°C/100h |
2.3 |
|
| Oxidative stability (MPa) 150°C/50h | 0.03 |
|
| Moisture resistance (%) | 1 |
|
| Work stability 100,000 times | 400 (max) |
|
| Low-temperature torque value (N·m×10-4) -60°C (starting/running) | 2710/950 |
|
| MIL-L15719A | Low-temperature torque value 2,000 N·m×10-4 -60°C | 1 sec |
| BTB | Free acid or free alkali | Neutral |
| Usage temperature range (°C) | -60 to +180 |
|
| Volatile content (%) 150°C/100h | 0.41 |
|
Low molecular weight silicone content (ppm) ∑D3-D10 |
Less than 100 |
|